Help & Answers
-
Map Orthophoto Distortion
Drone: DJI Mini 2 App: Dronelink Method: Map Altitude: 50m (ATL) Speed: 15km/hr Shutter: 3s interval (Electronic Shutter) I am assuming that the map…
-
changing the default up axis
Hi. I just set webodm up! I tested it with a bunch of test photos with my DSLR. There's no gyro, orientation sensor or GPS in it. When I create the point…
-
D
Regarding the max-concurrency parameter？
Regarding the max-concurrency parameter: The official specification states that processing 2‑megapixel photos results in a peak memory usage of 1 GB per…
-
Windows Installer or Docker?
I am trying to optimize processing on my Dell XPS15 laptop. I've got 64GB RAM, two SSD drives and the Nvidia GPU. I am striving for the highest quality…
-
I have a question about the texturing on 3D models. I would love to continue to use webODM
I have a question about the texturing on 3D models. I would love to continue to use webODM with my DJI Manifold Jobs, but unfortunately the texturing…
-
D
OOM
Today I tried deploying ODM and ODX with Docker. Using the same 32 GB RAM and 2500 photos, ODM worked fine and finished in about 3 hours. However, ODX…
-
W
Stockpile volume
When I define the base boundaries of a stockpile, I can only specify 31 points, and then the polygon closes and the volume calculations start…
-
A
Extra/duplicate projects in media folder
Hello, I am now running the linux version of webodm, and I was looking a little more deeply inside the media folder, where all projects are stored. I'm…
-
large-area ODX georeferencing accuracy
I’m reopening an older discussion so it doesn’t get lost after ODX separated from ODM and the community moved to Discord. With GCP-based projects, ODX…
-
P
CSRF upon login.
Hi getting the follwing uppon logging into WebODM. Forbidden (403) CSRF verification failed. Request aborted. More information is available with…
-
**DJI Mavic 3M: NDVI quality gap vs Pix4Dfields on the identical flight — seam leveling, band alignm
So i have been wrangling with this for over 3 weeks and i think i am finally at the stage where i need some professional opinion. Attached our two NDVI…
-
Make WebODM default to having 'media' layer enabled
Hello, I was curious if there's a way to have the media layer in the viewer enabled by default? I'm referencing the red pins in this photo. It would be…
-
M
How to Identify Reference Bands
After asking how to export the bands from my sensor separately in WEBodm, I ran into this other problems: I exported the orthophoto as you recommended and…
-
V
Error processing same previous data (webodm Orthomosaics)
Hi, I'm getting this orthomosaic after tryed to do it with "high resolution" settings: '1' the 3d picture is like a dome. on previous versions of webodm…
-
Hi, may I know if the volume i computed have a cut and fill volume, in webODM, it always s
Hi, may I know if the volume i computed have a cut and fill volume, in webODM, it always showed absolute +ve value, how should i know the absolute volume…
-
C
Windows version 3.2.6 Can't process any of my dataset - Errno2 EXIF folder
I've been using WebODM2.8.1 for a year or so and processes 50 or so datasets. I just upgraded to 3.2.6 and no matter what settings and profile i try, the…
-
K
Big error on GCPs
I am trying to figure out why GCPs are off by 10+ meters on my project. The GCPs were collected with Emlid equipment in EPSG:3794 (Slovenia 1996 / Slovene…
-
M
RTX 4050 GPU Not Being Used During WebODM Processing
Hello, I am from Brazil and I am new to using WebODM. I would like to know how I can improve the processing performance by taking full advantage of my…
-
M
How export individual bands from a multispectral data
I'm processing a set of multispectral images acquired with the M350 + MICASENSE RedEdge-p. After processing, I'd like to export the individual bands (red…
-
How to decrease noise in pointcloud?
Hi everybody, I made a mapping with GCPs. The orthophoto looks (really) good. However in the pointcloud (and also visible in DSM) I see (some) noise that…